It is currently Thu Oct 18, 2018 10:24 pm

Ulterra and Transducer Install on 197 sf

Electronics, projects, motors, drives, props, drill some holes, etc.
  • Author
  • Message


Intermediate member

  • Posts: 50
  • Joined: Mon Jul 08, 2013 9:42 pm
  • nospam: no

Ulterra and Transducer Install on 197 sf

PostTue Apr 04, 2017 6:54 am

Here is my solution for installing an Ulterra and still being able to use the anchor locker. I like Pioneer 180s bracket better but I had this before he had his solution perfected. The one good thing about this mount is that it serves as a neat home for all my electronic wires (transducer, ethernet cable, power, etc.)

In terms of the transducer wire, I used 3/8" recoil air hose, a bunch of vinyl tape and a flexible piece of tube to force the coils into place when stowing and to keep them compressed and out of the way when deploying. I have tested this version at all extremes and I'm finally convinced my solution will work. I really like not having to route the wires to the head and back down the coiled wire on the TM. ... p=drivesdk


Superstar member

  • Posts: 507
  • Joined: Fri May 18, 2007 8:24 am
  • Location: riverland terrace, james island, sc

Re: Ulterra and Transducer Install on 197 sf

PostTue Apr 04, 2017 8:08 am

very nice. i've never seen the auto-deploy in action.

now show us some fish.....
186 cape island, carolina blue hull, 150 VMax, & my golden retriever

Return to Technical Discussion, Fix it, improvements

Who is online

Users browsing this forum: No registered users and 1 guest